KSD1 D/J type ceramic thermostat

KSD1 D/J type ceramic thermostat 1.ceramic body, 2.horizontal terminals, 3.VDE,UL,JET,KTL approved 4.250v/10a or 125v/15a KSD1 D/J type ceramic thermostatCharateristicKSD1 and KSD series thermostats are one type of small bimetal temperature controllers with shells. The influence of certain ambient temperature on its thermal bimetal disk would result in the deformation of the disk, and its instant movement drives the contact and other components to open or close the electric appliances and equipments. In short, it is a reliable, long-life and non-interference thermal device with fixed working temperature.Application:The products are suitable for temperature control or overheat protection for such as hot-water heater, kettle, water dispenser, electronic disinfection device, dryer, microwave oven, electric heater, coffee machine, sandwich maker, vacuum cleaner, electric mop, toaster, soybean milk maker, electric irons and other home appliances and other electro-thermal devices and machines like electric motors and copier.Instructions:* Don’t let water or other liquid leak into the thermostat.* The surface has to been installed flatly and evenly with calorific surface.* The body case should not have any crack; the shape of terminal can’t be changed at will.Technical specifications

Electrical Rating	AC 250V Resistive load 10A or 16A; Inductive load 8A
	AC 125V Resistive load 15A; Inductive load 12A
	AC 250V Resistive load 25A
Operating Temperature	0~260 °C
Tolerance	±5°C,±3°C
Differential	10~40 °C
Endurance Test	UL,CUL: (25~210°C) 100000 cycleVDE: (0~260°C) 250V/16A 6000 cycle,250V/25A 5 cycleCMJ: (250°C) 10000 cycleKTL: (0~210°C) 250V/11A 10000 cycleCQC: (5~260°C) 250V/10A 10000 cycle
Dielectric Resistance	AC50Hz 1800V for 1second
insulation Resistance	More than 100MΩ (DC500V megger)
Contact Resistance	Less than 50mΩ (DC6V/1A milliohm meter)
Heat Resistance	Max operating temperature 260°C
	Max contact temperature 260°C
Normal Contact Status	Open / Close

Installation requirements

The enters of installing	23.8mm 24mm 25.5mm 30mm
Installing Forms	a. Activity type b. Fixed type c. Pressure plate d. Custom mode
Size	4.75mm×0.5mm or 4.75mm×0.8mm or 6.35mm×0.8mm
Terminal type	horizontal terminal
	vertical terminal
	both terminals 30/40/45 deg bend upward
	It can be custom mode to suit your need

      

KSD1 D/J type ceramic thermostat